[Home] Contact & Impressum    [Deutsch]

PERCY XS Speaker Controller

NEW   The XS-2496 is a High End 2-IN/4-OUT digital speaker management system which maintains the same high quality hardware present in former QRT versions. Designed for maximum versatility, it provides all the processing and control necessary for both live and fixed installation use. Proving for any crossover configuration, it offers 2 analog inputs, 4 analog outputs and a digital S/PDIF input, managed by a powerful MARANI M716 DSP Engine, for a full 96kHz processing, in addition to high performance 24 bit AD/DA Converters. Each input channel provides a choice of EQ with 30-band Parametric EQ, 3 ALL PASS Filter, Gain control, Noise Gate, RMS Compressor, Internal White/ Pink Noise Generator, and configurable Delay.Each output offers up to 7-band of parametric equalization, in addition to the crossover filters which themselves provide slopes from 6dB/Octave up to 48dB/Octave. Each output path also features Peak Limiter and configurable Delay.

Outstanding performance:

Excellent sonic performance with 24bit high end converters coupled with 96kHz sample rate; 2 inputs, 4 outputs with full matrix mixing

Top-grade DSP Engine:

30 band parametric equalization + 3 ALL PASS Filter per input channel

7 band parametric equalization per output channel

Each band can be switched to Bell, Shelving, HP/LP, Band Pass, Notch Filter

Crossover filters with slopes from 6dB/Octave up to 48dB/ Octave including Butterworth, Bessel, Linkwitz-Riley

Process Overflow limiting

Each output features a precision dynamic range controller composed of a Limiter working on RMS value of the limiter’s input

Adjustable Delay time up to 480 ms for every input channel and 270 ms for each output channel

Direct PC/Network Connection:

Rear panel USB connector for direct PC communications

RS485 connection for system setup, monitoring and control via fully manageable remote PC software

Control:

Front panel interactive LCD display for local access and configuration

Front panel 7-LED level meter indicators per channel

Simultaneous control up to 32 units via PC software

 

NEW   The XS-4496 is a High End 4-IN/4-OUT digital speaker management system which maintains the same high quality hardware present in former QRT versions. Designed for maximum versatility, it provides all the processing and control necessary for both live and fixed installation use. Proving for any crossover configuration, it offers 4 analog inputs, 4 analog outputs and a digital S/PDIF input, managed by a powerful MARANI M716 DSP Engine, for a full 96kHz processing, in addition to high performance 24 bit AD/DA Converters. Each input channel provides a choice of EQ with 13-band parametric EQ, Gain control, Noise Gate, RMS Compressor,Internal White/ Pink Noise Generator, and configurable Delay.Each output offers up to 11-band of parametric equalization, in addition to the crossover filters which themselves provide slopes from 6dB/Octave up to48dB/Octave. Each output path also features Peak Limiter, RMS Compressor and configurable Delay.

Outstanding Performance:

Excellent sonic performance with 24bit high end converters coupled with 96kHz sample rate
4 inputs, 4 outputs with full matrix mixing

Top-grade DSP Engine:

13 band parametric equalization per input channel
11 band parametric equalization per output channel
Each band can be switched to Bell, Shelving, HP/LP, Band Pass, Notch Filter, All Pass
Crossover filters with slopes from 6dB/Octave up to 48dB/ Octave including Butterworth, Bessel, Linkwitz-Riley
Process Overflow limiting
Each output features a precision dynamic range controller composed of a Limiter working on RMS value of the limiter’s input
Adjustable Delay time up to 480 ms for every input channel and 270 ms for each output channel
Phase correction per input and output channel

Direct PC/Network Connection:

Rear panel USB connector for direct PC communications
RS485 connection for system setup, monitoring and control via fully manageable remote PC software

Control:

Front panel interactive LCD display for local access and configuration
Front panel 7-LED level meter indicators per channel
Simultaneous control up to 32 units via PC software

Analog Input: 4 x XLR electronically balanced

Analog Output: 4 x XLR electronically balanced

Digital Input: 1 SPDIF; Gain 0dBu

Minimun Load: 150 ohm

THD+N: 0.001% at 1kHz 0dBu

S/N: >110dBA

Frequency Response: 20Hz – 20kHz; -0.5dBu at 20Hz and 20kHz

AD & DA Converters: 1x AK5388 24bit, 2x AK4396 24bit - 96kHz

Parametric Equalization: 13 PEQ filters per input; 11 filters per output

Input Gain: From -18dB to +12dB by 0.1dBu resolution steps

Output Gain: From -30dB to 0dB by 0.1dBu resolution steps

Filter Type: Bell, Shelving, HP/LP, All Pass, Band Pass, Notch Filter

Filter Gain: From -15dBu up to +15dBu by 0.5dBu resolution steps

Center Frequency: Selectable with a 1Hz resolution step from 20Hz up to 20kHz

Filter Q/BW: Bell Type: Q from 0.4 up to 128 in 100 steps
Shelv/Hp/LP Type: Q from 0.1 up to 5.1 in 100 steps
BandPass/Notch Type/ All Pass: Q from 4 up to 104 in 100 steps

Crossover Section HPF/LPF: Butterworth 6/12/18/24dB per octave
Bessel 12/24dB per octave
Linkwitz-Riley 12/24/36/48dB per octave

2 Internal Noise Generator(to input 1/2 and to input 3/4):  White/Pink Noise; Level from -40dBu to 0dBu

Input Noise Gate: Threshold from -80dBu up to -50dBu
Attack time from 1ms up to 1000ms; Release time from 10ms up to 1000ms

Input/Output RMS Limiter: Threshold from 20dBu up to -10dBu
Ratio 2:1~32:1; Knee: 0~100%
Make up from -12dB to +12dB
Attack time from 5ms up to 200ms;Release time from 0.1 sec up to 3 sec

Output Peak Limiter: Threshold from 20dBu to -10dBu
Attack time from 1ms up to 900ms; Release time from 0.1sec up to 5sec

Delay: 480ms 10.4us increment/decrement steps per input, 270ms 10.4us increment/decrement steps per output

PERCY XA

PERCY XA-2424


The XA-2424 supports a full matrix mixing mode where inputs may be routed/mixed in any ratio to any output. For remote configuration and control the XA-2424 can be connected via USB or RS485 connections.
The control remote PC software allows simultaneous control up to 32 units, setting all parameters and showing real time levels.

The XA-2448 is a high performance 2-IN/4-OUT digitalspeaker management system. Designed for maximum versatility, it provides all the processing and control necessary for both live and fixed installation use. Providing for any crossover configuration, it offers 2 analog inputs, 4 analog outputs and a digital S/PDIF input, managed by a powerful DSP Engine, in addition to high performance 24Bit AD/DA Converters. Each input channel provides a choice of EQ with 5-band Parametric equalization, Gain control and configurable Delay.Each output offers up to 7-band of parametric equalization, in addition to the crossover filters which themselves provide slopes from 6dB/Octave up to 48dB/Octave. Each output path also features RMS Compressor, Peak Limiter and configurable Delay.

The XA-4448 is a high performance 4-IN/4-OUT digitalspeaker management system. Designed for maximum versatility, it provides all the processing and control necessary for both live and fixed installation use. Providing for any crossover configuration, it offers 4 analog inputs, 4 analog outputs and a digital S/PDIF input, managed by a powerful DSP Engine, in addition to high performance 24Bit AD/DA Converters. Each input channel provides a choice of EQ with 5-band Parametric equalization, Gain control and configurable Delay. Each output offers up to 5-band of parametric equalization, in addition to the crossover filters which themselves provide slopes from 6dB/Octave up to 48dB/Octave. Each output path also features RMS Compressor, Peak Limiter and configurable Delay.